Solutions for a relative’s Alzheimer’s disease, a time lapse camera and a gingerbread robot which dances when it detects a human face – these are just some of the projects you’ve been telling us about after we asked you to show off your inventiveness with Raspberry Pi and other electronics platforms such as Arduino.
If you’re a regular reader this idea may be familiar to you – we also asked you to show us the Raspberry Pi projects you’d been working on towards the end of 2015. Many of you responded to that by telling us how you’d adapted and incorporated Arduino into your hardware projects – so we widened the scope.
As well as the highlights below, you can see all of the projects you’ve shared so far – and tell us about yours – at this GuardianWitness page, or, discuss the ideas in the comments.
First up, one of many musical ideas you’ve been sharing. This piece of kit, explained in some detail below, could provide the soundtrack to the rest of this roundup …
Monome + Raspberry Pi + Arduino + Python Step Sequencer
The brain is a Raspberry Pi 3 which runs the step sequencer program, written in python. The monome is connected to the Pi via USB. An Arduino Uno is also connected to the Pi via USB. The Arduino controls 8 servos, each with a "mallet" attached. (These mallets are actually Lego bricks clumsily taped onto coffee sticks.)
The Arduino is programmed to receive serial commands* from the python program. A command is one byte or 8 bits, each bit representing 'on' (play the note) and 'off' (do nothing) states of each servo.
The monome is totally controlled by the python program. The program sends serial commands that, for example, tell the monome which buttons need to light up or turn off. It also receives serial data from the monome - like, which buttons are getting pressed and depressed.
We also liked Ernest Warzocha’s “Musi”, an experimental instrument he hooks up to an Ableton Push.
This reader has created and modified an impressive-looking drone
Simone Dassi told us about another type of camera made with a Raspberry Pi – one she says can take a multispectral photo that monitors the health of plant life.
The next idea that caught our eyes was from a reader looking for solutions to make life easier for a relative with Alzheimer’s disease
David also shared another of his projects here.
Now, time for a coffee break
Raspberry Pi AND Arduino Coffee Roasting machine
This is a coffee roasting machine. The speed of the drum and temperature of the oven is controlled by the Raspberry via the Arduino.
It features a web interface via WiFi so it can be controlled by any web capable device.
The drum is driven by a stepping motor, controlled by the Arduino which gets the higher level commands from the Raspberry. Same goes for the Temperature, which the Raspberry reads from a thermocouple and controls via the Arduino and a solid state relay.
The software on the Pi is written in C#/Mono.
If coffee’s your drink, you might also want to check out “Alexabot” – which uses Amazon Alexa software combined with a Raspberry Pi robot to fetch this reader a cup on command.
Next, a game of virtual chess brought to life. Again, explained below the video
Internet-Of-Things Chessbord (play chess online with a real board!)
I love playing chess online but the 2D view on the screen feels very unintuitive to me - I much prefer playing with a physical chess board.
Hence the Internet-Of-Things chess board was born. It connects to an online game so that the user can play chess with anyone in the world, with a real board.
It uses an Arduino to control the LEDs and detect the positions of the pieces, and it uses a Raspberry Pi to check for illegal moves and host the online game.
Gaming possibilities don’t stop at chess, of course. Paul Bilan told us about his cute-looking mini arcade machine, and Claire Pollard shared the Formula Pi project, a racing series she commentates on.
Phew, time flies, eh – we’re almost there …
Arduino clock
A clock with roots that occasionally hoots. The time it can tell without even a bell. Ask it nicely and it will tell you precisely, but if no one’s around it won’t make a sound. A dozen on their perch won’t leave you in the lurch, the assembled dawn chorus will sing something forus. To make time a pleasure – a real treasure – not just something to measure.
Can you work it out? The time was 10:45 when I pushed the button
Can’t figure out how to tell the time? Hint: count those birds … As for whether it’s morning or afternoon, well, Kim Booth, who shared the project, says in a blogpost explaining the technicalities: “You can look out of the window for that.”
Finally (almost) could this retro-looking notification centre challenge the Amazon Echo?
You can read more about Martin’s project and see a video at his instructables page, here. Another notification system we liked was from James Dawson, who told us how he’s using Raspberry Pi to modify an Amazon Dash button to text him when someone’s at the door.
As ever, thank you for your contributions. Other highlights include an “off-grid eco campsite control system”, a robot that helps teach robotics to those on a tight budget and a colour-tracking model owl. You can read about these and more at the dedicated GuardianWitness page.
